Slippy Feet - Fluon PTFE Disp 30 | 10ml with brush applicator bottle

We recommend applying with cotton wool for smooth application

 

Don't chase your ants around the house because of ineffective escape prevention.

 

Use Slippy Feet, Formulated as an efficient PTFE liquid it can last several months at a time, a 25mm rim round the tank will leave a semi transparent (cloudy) layer which will be so slippy, little feet will not grip.

 

Be advised however, if condensation happens, dry the area and re-apply slippy feet.

 

Usage instructions:

  • Make sure area is clean and dry
  • Apply an even layer 1 to 2 inches thick around the edge of the area you wish to prevent ants escaping using a cotton wall ball or swab. (the brush applicator can be used but using too much may cause runs down you glass/acrylic..
  • Allow 10 minutes to dry, wipe any runs when dry.
  • Apply a second coat of Slippy Feet if required (you should see a haze in the applied area) more than 2 coats will not increase the products effectiveness.
  • Done!

Notes:

 

DO NOT CONSUME

KEEP OUT OF REACH OF CHILDREN

DO NOT REFRIGERATE

DO NOT SHAKE - ROLL MONTHLY

SLIPPY FEET WILL DISPERSE IN WATER, AREAS WITH HIGH HUMIDITY WILL NEED TOPPING UP REGULARLY TO MAINTAIN PROTECTION.

Slippy Feet - PTFE | Fluon - 10ml

£5.99Price